Lightwave Research Status Cue, User Manual, Page: 114 / 348

5-10 Status Cue User’s Manual
Xfade
Xfade (crossfade) is the amount time that a construct takes to reach its new value.
RGB color changes, and Dim are examples of Constructs that use Xfade. Xfade
times affect all fixtures in the Scene or a Step (Scene) in a Sequence. Thus, each
Step of a Sequence can have different Xfade times.
¹Note: LWR fixtures use MSpeed.
The Scene or Sequence window displays the current Xfade value, ranging from
0.1 second
to
36 minutes
(
2160 seconds
). For example, set the
Dim
in Scene 1
to
100%
and the
Xfade
in Scene 1 to
5 seconds
. Then, set the
Dim
in Scene 2 to
50 . When you advance from Scene 1 to Scene 2, the selected fixtures in Scene 1
will take 5 seconds to fade from full intensity to half intensity in Scene 2. Refer to
Figure 5.11.
Figure 5.11. Xfade Diagram
Table 5.1 provides a list of fixtures and Constructs are controlled by Xfade.