Lightwave Research Status Cue User Manual Download Page 307

Page: 307 / 348

Appendix B

Supplemental Information

B-15

Uploading Devices

New software code is easily uploaded to devices from Status Cue. Each Status Cue
software release provides the most recent software code (

.s19

files) for the following

items:

•

Console

•

LinkCard

•

Cyberlight

•

Studio Color

•

future Lightwave Research products

Note: software codes seldom change, but it is highly recommended that you use the latest

code. Contact your Authorized dealer or High End Systems.

To upload devices, complete the following procedure:

1. Remove any devices which may inhibit bi-directional communication (buffer boxes,

DMX splitters, repeaters, etc.) and check to ensure that the last fixture on each Link is
terminated.

2. Select

Device upload...

from the

File

drop-down menu. This brings up the

Device Code

Upload

dialogue box. Refer to Figure B.11.

Figure B.11. Device Code Upload Dialogue Box

3. Click the box beside the device to upload.

Summary of Contents for Status Cue





























































































































































































































































































































































Search results

Summary of Contents for Status Cue

Reviews:

Lightwave Research Status Cue, User Manual, Page: 307 / 348

Search results

Summary of Contents for Status Cue

Reviews: