Lightwave Research Status Cue, User Manual, Page: 304 / 348

B-12 Status Cue User’s Manual
Adjusting Console Lights
To adjust Littlite brightness, use the
Console Light Intensity
scroll bar. To adjust the
intensity balance between the two lights, use the
Balance
scroll bar (the middle is equal
balance). Refer to Figure B.9.
Setting Default Xfade and Delay Times
The default Xfade and Delay times are the values that automatically appear when new
Scenes and Sequences are created. To set default times, click in the
Default Xfade
or the
Default Delay
boxes and then type the desired times. Refer to Figure B.9.
Setting Numeric Timeout
Numeric timeout is the time between a numeric key press (in the CONTROL group) and
the time the Console automatically accepts the input (key press). This feature is used when
selecting fixtures. To set appropriate time, click in the
Numeric Timeout
box and enter the
desired time. Refer to Figure B.9.
Notes: Numeric Timeout can be disabled by deselecting its
Enable
box. When disabled, it
is necessary to press the < ENTER > key in the CONTROL group after a fixture
number is entered.
Enabling CueList Confirmations
CueList confirmations are provided to ensure cues are recorded and to close a CueList. To
enable or disable CueList confirmations, click the following check boxes (Figure B.9):
•
Beep when recording Cues
- the system speaker beeps to confirm when a new cue is
recorded
•
Prompt to close CueList
- provides a confirmation dialogue box to close a CueList
instead of instantly closing the CueList
Enabling and Disabling Startup Animation
To enable or disable the animation at Status Cue startup, click the
Show Startup Animation
check box. Refer to Figure B.9.