Lightwave Research Status Cue, User Manual, Page: 163 / 348

Chapter 6 Sequences 6-5
6
Inserting New Steps
To insert a new Step in the middle of a Sequence, complete the following
procedure:
1. Select and scroll through the open Sequences by pressing the < SEQ > key
in the OBJECT group (Figure 6.1). Alternately, select an open Sequence
from the
Window
drop-down menu.
2. Press the < STEP > key in the OBJECT group. The LED will flash.
3. Select the insertion point by clicking on a Step.
4. Press the <
INSERT
> key in the CONTROL group (Figure 6.4). A new Step
will be inserted before the selected Step. Alternately, press the < Insert >
key on the keyboard.
Figure 6.4. CONTROL Group
Note: the <STEP> key will continue to flash until the <SEQ> key is pressed.