Lightwave Research Status Cue, User Manual, Page: 68 / 348

1-28 Status Cue User’s Manual
Starting Status Cue for Windows
In this section you will begin using the Status Cue for Windows application.
Just double-click on the
Status Cue Help icon in the Status Cue group to get
started with the help. Otherwise, continue with Starting Status Cue for
Windows.
1. To start Status Cue for Windows:
2. Double-click on the Status Cue icon in the Status Cue group. You will be
prompted to upload software into the LinkCard. Refer to Figure 1.34.
Figure 1.34. Upload New Code to LinkCard Dialogue Box
Notes: If the Master LinkCard Not Found popup appears, then you do not
have a LinkCard installed in the PC or you may have address or IRQ
level conflicts with other option cards.
The most common cause is IRQ conflict with another option card. Try
selecting a different IRQ level, for example, IRQ 10. If this does not
work you may have conflict with the base memory address. Appendix A
provides additional information.
In the event that you get a General Protection Fault message from
Windows, write down the error message and contact High End Systems
technical support. Then it will be necessary to exit Windows and turn
off your computer.
3. Click Yes to begin the upload. This will bring up the Device Upload Status
information box.