Lightwave Research Status Cue, User Manual, Page: 204 / 348

8-6 Status Cue User’s Manual
Insertion Methods
Select an
Insertion Method
from its drop-down menu. Alternately, from the
CueList
drop-down menu located on the menu bar, select
Insertion Method
and
then the desired pop-out item.You may choose from the following items:
•
No Insertion
-will not allow any cues to be put into the list. This ensures no cues
can accidentally be placed into a finalized CueList.
•
After Selection
-places the next cue immediately after the selected cue. If this is
used between whole numbers, the numbering will begin in decimals between
the whole numbers.
Example: if 4 is selected and the next cue number is 5, 4.100 will be the inserted
number.
•
Before Selection
-inserts the cue before the selected cue.
•
At Beginning
-inserts cues at the beginning of the CueList.
•
At End
-inserts cues at the end of the CueList.
•
At Time
-inserts cues at the time displayed on the clock of the CueList.
Time Options
Time options set the time a cue will play in relation to the clock. Select a
Time
Option
from its drop-down menu. Alternately, from the
CueList
drop-down menu
located on the menu bar, select
Clock Source
and then the desired pop-out
item.You may choose from the following items:
•
Absolute
-cues will be played according to the time on the clock.
•
Relative
-after a cue is played, the next cue plays when the time in the
Cue
Time
field elapses.
Example: if you have three cues with times of 0 seconds, 12 seconds, and 2
minutes, the first cue plays immediately, the second cue plays 12
seconds after the first cue, and the third cue plays 2 minutes after the
second cue.
Cue Sorting Window
CueLists can be sorted by either time or number. Click the desired option. Refer to
Figure 8.7.
Figure 8.7. Cue Sorting Window
Note: using the
Relative
time option allows sorting by number only.