Lightwave Research Status Cue, User Manual, Page: 179 / 348

Chapter 7 Songs 7-5
7
Inserting a Preset
After Presets are created, additional Presets can be inserted without
overwriting existing Presets. Inserting a Preset pushes existing Presets over
one number while assigning the Scene or Sequence to the selected Preset.
Additionally, it also moves the Preset Type and updates any CueList using the
Preset. To insert a Preset, complete the following procedure:
1. Press the < SCENE > or < SEQUENCE > key in the OBJECT group to select and
scroll though open Scenes and Sequences.
2. Select the Insert Preset item from the Song drop-down menu. This brings up
the Insert a Preset in Song dialogue box. Refer to Figure 7.7.
Figure 7.7. Insert a Preset in Song Dialogue Box
3. Press the desired Instant Preset (Figure 7.4) or Fader Preset (Figure 7.5) key
on the console to insert (set) the Scene or Sequence into. Alternately, click the
desired Preset in the
Insert a preset in Song dialogue box. The Preset will be
inserted and all other Presets will be shifted over. If the Preset can not be
inserted (meaning all Presets are full) an insertion error dialogue box is
brought up. Refer to Figure 7.8.
Figure 7.8. Insertion Error Dialogue Box