Lightwave Research Status Cue, User Manual, Page: 207 / 348

Chapter 8 CueLists 8-9
8
Cutting or a Copying Scenes and Sequences Into a Cue
To cut or copy a Scene or Sequence into a cue, complete the following procedure:
1. Open or create the Scene or Sequence to place in a cue.
2. To cut and paste the Scene into a cue, drag the clapboard icon onto the
desired cue (the icon will appear with a
–
in it). To copy the Scene or
sequence, hold down the < Ctrl > key and drag the clapboard icon onto the
desired cue (the icon will appear with a
+
in it). When the cue is
inserted, a Preset will be assigned to the cue.
Placing the Active Scene or Sequence Into a Cue
If a Scene or Sequence is the active window on the desktop, you can copy it as a
cue. To copy the active Scene or Sequence to a cue, complete the following
procedure:
1. Press the <
CUE
> button in the MEMORY group. This will bring up the
Store Cue
dialogue box. Refer to Figure 8.10.
Figure 8.10. Store Cue Dialogue Box
2. Enter the desired data in the fields and click the
OK
button to complete the
procedure. The new cue will be stored as a Preset.
Note: the next cue number is automatically chosen according to the insertion
method.