Lightwave Research Status Cue User Manual Download Page 122

Page: 122 / 348

5-18

Status Cue

User’s Manual

Color

The

Color

construct is used to select a desired color for fixtures containing fixed

color wheels. To edit the

Color

construct, complete the following procedure.

1. Select the desired fixture(s). Refer to "Selecting Fixtures" on page 5-5.

2. Using the following keys in the COLOR group (Figure 5.22). Select the

desired color function(s):

•

>- whole color

•

> - half colors

•

>- special function

•

>- enables MSpeed on the

Color

Construct

•

>- spins the color wheel forward

•

>- spins the color wheel in reverse

•

>- slow scan

•

>- fast scan

Figure 5.22. COLOR Group

3. Press <

> - <

> in the COLOR group to assign the desired color.

Summary of Contents for Status Cue





























































































































































































































































































































































Search results

Summary of Contents for Status Cue

Reviews:

Lightwave Research Status Cue, User Manual, Page: 122 / 348

Search results

Summary of Contents for Status Cue

Reviews: