Lighthouse SOLAIR 3350, Operating Manual

Page: 15 / 184

00
248083387-1 Rev 10 1-1
1
General Safety
Safety
Considerations
Warnings and cautions are used throughout this manual and the reader
should become familiar with the meaning of a warning before
operating the particle counter. Most warnings will appear in the left
margin of the page next to the subject or step to which it applies. Take
care when performing any procedures preceded by or containing a
warning. The classifications of warnings are defined as follows:
WARNING:
There are
no user-serviceable
components inside the
particle counter.
• LASER - pertaining to exposure to visible or invisible laser
radiation
• Electrostatic - pertaining to electrostatic discharge
• Network Connect - pertaining to communication ports and
instrument damage
LASER Safety
Information
This product is considered to be a Class 1 LASER product (as defined
by FDA 21 CFR, §1040.10), when used under normal operation and
maintenance. Performing service on the sensor can result in exposure
to invisible radiation.
WARNING:
The use
of controls, adjustments
or procedures other than
those specified within
this manual may result in
personal injury and/or
damage to this
instrument.
The particle counter has been evaluated and tested in accordance with
EN 61010-1:2012, “Safety Requirements For Electrical Equipment for
Measurement, Control and Laboratory Use” and IEC 60825-1:2007,
“Safety of Laser Products”.
For further technical assistance, contact our Technical Support Team at
1-800-945-5905 (USA Toll Free), 1-541-770-5905 (Outside of USA).
Electrostatic
Safety
Information
Electrostatic discharge (ESD) can damage or destroy electronic
components. Therefore, any service or maintenance work should be
done at a static-safe work station. A static-safe work station requires an
ESD consultant to evaluate the work environment and propose the
equipment and apparel needed for just such a work station to be
successful.