Lighthouse SOLAIR 3350, Operating Manual

Page: 99 / 184

Operate Counter
248083387-1 Rev 10 6-35
Note:
The screen
alignment function can
also be accessed by
touching the screen when
powering the instrument
on.
• Once the final alignment is complete, the following screen is
displayed. See Figure 6-46. Touch anywhere in the screen to return
to the OPTIONs screen.
Figure 6-46 Alignment Saved Screen
The ScanAir option is not available for this model at this time.
AUTOSTART MODE
When Autostart mode is enabled, set the Delay time to at least 5
seconds.
If Autostart mode is enabled, when the instrument is powered on (or
regains power after a power outage), the instrument will immediately
begin sampling based its configured mode, delay, start, and hold times.
DiffCuml on Zoom
If DiffCuml on Zoom is enabled, the counter’s display will show two
columns of data simultaneously - Differential and Cumulative.
ONE CHANNEL
If One Channel is enabled, only the first channel will be displayed on