Lighthouse SOLAIR 3350, Operating Manual, Page: 46 / 184

Lighthouse SOLAIR 3350, 5350 Gen E Operating Manual
4-12 248083387-1 Rev 10
4. Select
Network Settings
and choose the
Use the following IP
configuration:
radio button.
• Enter the
IP Address:
“
XXX.XX.X.XX
” and the
Subnet Mask:
“255.255.255.0”
.
• Leave the
Default Gateway:
blank unless the IT department
indicates one is needed. If a gateway is needed, the IT department
will provide one
• Press the
OK
button to save the settings. Network Settings will
display
Done!
See Figure 4-9.
Figure 4-9 Network Settings
Note:
These settings
should be the default
settings and may not need
to be changed.
5. Select
Serial Settings
under
Channel 1
.Verify that the
Port
Settings
are set to the following:
• Protocol: RS485 - 2 wire
• Flow Control: None
• BaudRate: 19200
• Data Bits: 8