Lexmark Optra S 1250 User Manual Download Page 293

Page: 293 / 427

277

Duplex Option

Duplex

Option

Installing Options

Lift the printer by the hand grips or ask someone to help
you lift it and lower it onto the duplex option.

Be sure the

edges of the printer and the duplex option are aligned so
that all the parts fit.

Reconnect any disconnected cables.

Plug in the printer power cord.

Turn the printer power On (|).

Note:

Verify that the duplex option is installed properly.
See “Verifying the Installation of Options” on
page 325.

Hand Grip

Summary of Contents for Optra S 1250












































































































































































































































































































































































































































Search results

Summary of Contents for Optra S 1250

Reviews:

Related manuals for Optra S 1250

Brands by name

Popular brands

Lexmark Optra S 1250, User Manual

Search results

Summary of Contents for Optra S 1250

Reviews:

Related manuals for Optra S 1250

Brands by name

Popular brands