Lexmark Optra S 1250 User Manual Download Page 95

Page: 95 / 427

Using the Operator Panel and Menus

Using

the
Operator

Panel

Menus

Using Your Printer

Factory Defaults

Restore
Do Not Restore

When you restore the factory default settings:

• All downloaded resources (fonts, macros, and so on) in printer memory

(RAM) are deleted. (Resources residing in the Flash Memory Option or
Hard Disk with Adapter Option are unaffected.)

• All menu settings are returned to the factory default values except:

Display Language

(SETUP MENU) which is the operator panel

display language
- All settings in the PARALLEL MENU, SERIAL MENU, NETWORK
MENU, INFRARED MENU, and LOCALTALK MENU.

To determine the factory default paper size value, see PAPER SIZE on
page 62.

Format Flash

Yes
No

The

Format Flash

menu item does not display if the installed option is

defective or is Read/Write or Write protected.

51 Defective Flash

displays

during printer power on. See

51 Defective Flash

on page 186 for more

information.

Formatting deletes all resources stored in flash memory and prepares the
flash memory card to receive new resources.

Warning:

If you select

Format Flash

and then press

Go,

any data stored in

flash memory is lost.

Do not turn off the printer when the flash is formatting.

Tests Menu Selections (Continued)

Menu Item

Values and Functions of the Menu Items

* Factory default

Summary of Contents for Optra S 1250












































































































































































































































































































































































































































Search results

Summary of Contents for Optra S 1250

Reviews:

Related manuals for Optra S 1250

Brands by name

Popular brands

Lexmark Optra S 1250, User Manual

Search results

Summary of Contents for Optra S 1250

Reviews:

Related manuals for Optra S 1250

Brands by name

Popular brands