Lenovo NeXtScale nx360 M4 Installation And Service Manual Download Page 360

Page: 360 / 738

4. If the problem occurs on the same DIMM connector, swap the affected DIMMs (as indicated

by the error LEDs on the system board or the event logs) to a different memory channel or
microprocessor.

5. (Trained technician only) If the problem occurs on the same DIMM connector, check the DIMM

connector. If the connector contains any foreign material or is damaged, replace the system
board.

(Trained service technician only) Remove the affected microprocessor and check the

microprocessor socket pins for any damaged pins. If a damage is found, replace the system
board.

7. (Trained service technician only) If the problem is related to microprocessor socket pins,

replace the system board.

•

806f0313-1701ffff : A software NMI has occurred on system [ComputerSystemElementName].

(NMI State)

This message is for the use case when an implementation has detected a Software NMI.

May also be shown as 806f03131701ffff or 0x806f03131701ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0228

User Response

Check the device driver.

Reinstall the device driver.

3. Update all device drivers to the latest level.

4. Update the firmware (UEFI and IMM).

•

806f0323-2101ffff : Power cycle of system [ComputerSystemElementName] initiated by watchdog

[WatchdogElementName]. (IPMI Watchdog)

This message is for the use case when an implementation has detected a Power Cycle by Watchdog
occurred.

May also be shown as 806f03232101ffff or 0x806f03232101ffff

346

IBM NeXtScale nx360 M4 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M4



































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M4

Reviews:

Related manuals for NeXtScale nx360 M4

Brands by name

Popular brands

Lenovo NeXtScale nx360 M4, Installation And Service Manual

Search results

Summary of Contents for NeXtScale nx360 M4

Reviews:

Related manuals for NeXtScale nx360 M4

Brands by name

Popular brands