Lenovo NeXtScale nx360 M4 Installation And Service Manual Download Page 275

Page: 275 / 738

User Response

1. Make sure there is a node filler correctly installed for the empty node slot.

2. Make sure the air baffles are placed and correctly installed; and make sure the node cover

is installed and completely closed.

3. Make sure the fans are operating, and there are no obstructions to the airflow (both front and

rear of the server).

4. Reduce the Ambient temperature. The system must be operating within the specifications. (see

Features and specifications for more information)

•

80010901-1501ffff : Numeric sensor [NumericSensorElementName] going high (upper critical)

has asserted. (PIB Ambient Temp)

This message is for the use case when an implementation has detected an Upper Critical sensor going
high has asserted.

May also be shown as 800109011501ffff or 0x800109011501ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0494

User Response

1. Make sure there is a node filler correctly installed for the empty node slot.

2. Make sure the air baffles are placed and correctly installed; and make sure the node cover

is installed and completely closed.

3. Make sure the fans are operating, and there are no obstructions to the airflow (both front and

rear of the server).

4. Reduce the Ambient temperature. The system must be operating within the specifications. (see

Features and specifications for more information)

•

80010901-1502ffff : Numeric sensor [NumericSensorElementName] going high (upper critical) has

asserted. (GPU Outlet Temp)

This message is for the use case when an implementation has detected an Upper Critical sensor going
high has asserted.

Appendix A. Integrated Management Module II (IMM2) error messages

261

Summary of Contents for NeXtScale nx360 M4



































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M4

Reviews:

Related manuals for NeXtScale nx360 M4

Brands by name

Popular brands

Lenovo NeXtScale nx360 M4, Installation And Service Manual

Search results

Summary of Contents for NeXtScale nx360 M4

Reviews:

Related manuals for NeXtScale nx360 M4

Brands by name

Popular brands