Lenovo NeXtScale nx360 M4 Installation And Service Manual Download Page 386

Page: 386 / 738

Prefix:

PLAT

ID:

0816

User Response

1. Make sure that the installed microprocessors are compatible with each other (see Installing a

microprocessor and heat sink for information about microprocessor requirements).

2. Update the server firmware to the latest level (see Updating the firmware).

3. (Trained technician only) Replace the incompatible microprocessor.

•

806f0607-0302ffff : An SM BIOS Uncorrectable CPU complex error for [ProcessorElementName]

has asserted. (CPU 2)

This message is for the use case when an SM BIOS Uncorrectable CPU complex error has asserted.

May also be shown as 806f06070302ffff or 0x806f06070302ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - CPU

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0816

User Response

1. Make sure that the installed microprocessors are compatible with each other (see Installing a

microprocessor and heat sink for information about microprocessor requirements).

2. Update the server firmware to the latest level (see Updating the firmware).

3. (Trained technician only) Replace the incompatible microprocessor.

•

806f0607-2584ffff : An SM BIOS Uncorrectable CPU complex error for [ProcessorElementName]

has asserted. (All CPUs)

This message is for the use case when an SM BIOS Uncorrectable CPU complex error has asserted.

May also be shown as 806f06072584ffff or 0x806f06072584ffff

Severity

Error

Serviceable

372

IBM NeXtScale nx360 M4 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M4



































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M4

Reviews:

Related manuals for NeXtScale nx360 M4

Brands by name

Popular brands

Lenovo NeXtScale nx360 M4, Installation And Service Manual

Search results

Summary of Contents for NeXtScale nx360 M4

Reviews:

Related manuals for NeXtScale nx360 M4

Brands by name

Popular brands