Lenovo NeXtScale nx360 M4 Installation And Service Manual Download Page 554

Page: 554 / 738

Severity

Error

User Response

Complete the following steps:

1. Check log for a separate error for an associated PCIe device and service that error.

2. Check IBM support site for an applicable service bulletin or firmware update for the system or

adapter that applies to this error.

3. (Trained Service technician only) Replace the system board.

•

S.680B8 [S.680B8] Internal QPI Link Failure Detected.

Explanation:

Internal QPI Link Failure Detected

Severity

Error

User Response

Complete the following steps:

1. Check IBM support site for an applicable service bulletin or firmware update that applies to

this error.

2. Inspect processor socket for foreign debris or damage. If debris is found remove debris.

3. If error recurs, or socket damage is found, replace the system board (Trained Service technician

only) .

4. (Trained Service Technician Only) Replace the processor.

•

S.680B9 [S.680B9] External QPI Link Failure Detected.

Explanation:

External QPI Link Failure Detected

Severity

Error

User Response

Complete the following steps:

1. Check IBM support site for an applicable service bulletin or firmware update that applies to

this error.

2. Inspect processor socket for foreign debris or damage. If debris is found remove debris.

3. If error recurs, or socket damage is found, replace the system board (Trained Service technician

only) .

•

W.11004 [W.11004] A processor within the system has failed the BIST.

Explanation:

Processor Self Test Failure Detected

Severity

Error

User Response

Complete the following steps:

540

IBM NeXtScale nx360 M4 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M4



































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M4

Reviews:

Related manuals for NeXtScale nx360 M4

Brands by name

Popular brands

Lenovo NeXtScale nx360 M4, Installation And Service Manual

Search results

Summary of Contents for NeXtScale nx360 M4

Reviews:

Related manuals for NeXtScale nx360 M4

Brands by name

Popular brands