Lenovo NeXtScale nx360 M4, Installation And Service Manual

Page: 51 / 738

Step 2. When prompted,
<F1 Setup>
is displayed, press F1. If you have set an administrator password, you
must type the administrator password to access the full Setup utility menu. If you do not type the
administrator password, a limited Setup utility menu is available.
Step 3. Select System Settings
➙
Storage .
Step 4. Press Enter to refresh the list of device drivers.
Step 5. Select the device driver for your RAID controller and press Enter.
Step 6. Follow the instructions in the documentation for your RAID controller.
IBM Advanced Settings Utility program
The IBM Advanced Settings Utility (ASU) program is an alternative to the Setup utility for modifying UEFI
settings.
Use the ASU program online or out of band to modify UEFI settings from the command line without the need
to restart the system to access the Setup utility.
You can also use the ASU program to configure the optional remote presence features or other IMM2
settings. The remote presence features provide enhanced systems-management capabilities.
In addition, the ASU program provides IMM LAN over USB interface configuration through the command-line
interface.
Use the command-line interface to issue setup commands. You can save any of the settings as a file and run
the file as a script. The ASU program supports scripting environments through a batch-processing mode.
For more information and to download the ASU program, go to
http://www.ibm.com/support/entry/portal/docdisplay?lndocid=TOOL-ASU.
Updating IBM Systems Director
Use this information to update the IBM Systems Director.
If you plan to use IBM Systems Director to manage the server, you must check for the latest applicable
IBM Systems Director updates and interim fixes.
Note: Changes are made periodically to the IBM website. The actual procedure might vary slightly from
what is described in this document.
Installing a newer version
To locate and install a newer version of IBM Systems Director, complete the following steps:
Step 1. Check for the latest version of IBM Systems Director:
a. Go to http://www-03.ibm.com/systems/software/director/resources.html.
b. If a newer version of IBM Systems Director than what comes with the server is shown in the
drop-down list, follow the instructions on the web page to download the latest version.
Step 2. Install the IBM Systems Director program.
Installing updates with your management server is connected to the Internet
If your management server is connected to the Internet, to locate and install updates and interim fixes,
complete the following steps:
Step 1. Make sure that you have run the Discovery and Inventory collection tasks.
Chapter 2
.
Configuration information and instructions
37