Lenovo NeXtScale nx360 M4 Installation And Service Manual Download Page 650

Page: 650 / 738

3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s).

Reconnect it to power.

4. Make sure that DSA and BIOS/uEFI are at the latest level.

Related links

–

IBM Support website

–

Latest level of DSA

–

Latest level of BMC/IMM

•

201-862-000 : Standalone Memory Test Aborted

No OEM1 structure found.

Recoverable

Severity

Warning

Serviceable

Automatically notify support

User Response

Complete the following steps:

1. Perform the actions mentioned one at a time and try the test after each action.

2. If the problem remains, contact your technical-service representative.

3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s).

Reconnect it to power.

4. Make sure that DSA and BIOS/uEFI are at the latest level.

Related links

–

IBM Support website

–

Latest level of DSA

–

Latest level of BMC/IMM

•

201-862-001 : Standalone Memory Test Aborted

No OEM1 structure found.

Recoverable

Severity

Warning

Serviceable

Automatically notify support

636

IBM NeXtScale nx360 M4 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M4



































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M4

Reviews:

Related manuals for NeXtScale nx360 M4

Brands by name

Popular brands

Lenovo NeXtScale nx360 M4, Installation And Service Manual

Search results

Summary of Contents for NeXtScale nx360 M4

Reviews:

Related manuals for NeXtScale nx360 M4

Brands by name

Popular brands