Lenovo NeXtScale nx360 M4 Installation And Service Manual Download Page 579

Page: 579 / 738

•

218-900-000 : Brocade:MemoryTest Failed

A failure was detected while testing the adapter memory.

Recoverable

Severity

Error

Serviceable

Yes

Automatically notify support

User Response

Complete the following steps:

1. Rerun the test.

2. Verify whether the firmware is at proper level.

3. Rerun the test.

4. If the problem remains, contact your IBM technical-support representative.

Related links

–

IBM Support website

–

Latest level of DSA

–

Latest level of BMC/IMM

•

218-901-000 : Brocade:ExternalLoopbackTest Failed

A failure was detected during the Loopback test.

Recoverable

Severity

Error

Serviceable

Yes

Automatically notify support

User Response

Complete the following steps:

1. Check cable connections.

2. Rerun the test.

3. Verify whether the firmware is at proper level.

4. Rerun the test.

5. If the problem remains, contact your IBM technical-support representative.

Related links

Appendix C. DSA diagnostic test results

565

Summary of Contents for NeXtScale nx360 M4



































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M4

Reviews:

Related manuals for NeXtScale nx360 M4

Brands by name

Popular brands

Lenovo NeXtScale nx360 M4, Installation And Service Manual

Search results

Summary of Contents for NeXtScale nx360 M4

Reviews:

Related manuals for NeXtScale nx360 M4

Brands by name

Popular brands