Lenovo NeXtScale nx360 M4 Installation And Service Manual Download Page 310

Page: 310 / 738

Run the DSA program.

Reseat the adapter.

Replace the adapter.

6. (Trained technician only) Replace microprocessor n.

7. (Trained technician only) Replace the system board. (n = microprocessor number)

•

806f0009-1301ffff : [PowerSupplyElementName] has been turned off. (Host Power)

This message is for the use case when an implementation has detected a Power Unit that has been
Disabled.

May also be shown as 806f00091301ffff or 0x806f00091301ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Power Off

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0106

User Response

No action; information only.

•

806f000f-220101ff : The System [ComputerSystemElementName] has detected no memory in

the system. (ABR Status)

This message is for the use case when an implementation has detected that memory was detected in
the system.

May also be shown as 806f000f220101ff or 0x806f000f220101ff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Memory

296

IBM NeXtScale nx360 M4 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M4



































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M4

Reviews:

Related manuals for NeXtScale nx360 M4

Brands by name

Popular brands

Lenovo NeXtScale nx360 M4, Installation And Service Manual

Search results

Summary of Contents for NeXtScale nx360 M4

Reviews:

Related manuals for NeXtScale nx360 M4

Brands by name

Popular brands