Lenovo NeXtScale nx360 M4 Installation And Service Manual Download Page 300

Page: 300 / 738

Critical - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0522

User Response

1. Check for a server firmware update.

2. Make sure that the installed microprocessors are compatible.

3. Make sure the microprocessor 2 expansion board is installed correctly (see Installing the

microprocessor 2 expansion board).

4. (Trained technician only) Replace microprocessor 2.

5. (Trained technician only) Replace microprocessor 2 expansion board.

•

80070228-2e01ffff : Sensor [SensorElementName] has transitioned to critical from a less severe

state. (IPMB IO Error)

This message is for the use case when an implementation has detected a Sensor transitioned to critical
from less severe.

May also be shown as 800702282e01ffff or 0x800702282e01ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Other

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0522

User Response

If the specified sensor is IPMB IO Error, Me Error or ME Flash Error, complete the following steps
until the problem is solved:

1. Restart IMM. If the error still appears, proceed step 2.

2. Update the firmware (UEFI and IMM) to the latest level. If the error still appears, proceed step 3.

Replace the node.

•

80070301-0301ffff : Sensor [SensorElementName] has transitioned to non-recoverable from a

less severe state. (CPU 1 OverTemp)

286

IBM NeXtScale nx360 M4 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M4



































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M4

Reviews:

Related manuals for NeXtScale nx360 M4

Brands by name

Popular brands

Lenovo NeXtScale nx360 M4, Installation And Service Manual

Search results

Summary of Contents for NeXtScale nx360 M4

Reviews:

Related manuals for NeXtScale nx360 M4

Brands by name

Popular brands