Lenovo NeXtScale nx360 M4 Installation And Service Manual Download Page 388

Page: 388 / 738

•

806f060d-0402ffff : Array [ComputerSystemElementName] has failed. (Computer HDD1)

This message is for the use case when an implementation has detected that an Array Failed.

May also be shown as 806f060d0402ffff or 0x806f060d0402ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Yes

Alert Category

Critical - Hard Disk drive

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0176

User Response

1. Make sure that the RAID adapter firmware and hard disk drive firmware are at the latest level.

2. Make sure that the SAS cable is connected correctly.

Replace the SAS cable.

Replace the RAID adapter.

5. Replace the hard disk drive that is indicated by a lit status LED.

•

806f060d-0403ffff : Array [ComputerSystemElementName] has failed. (Computer HDD2)

This message is for the use case when an implementation has detected that an Array Failed.

May also be shown as 806f060d0403ffff or 0x806f060d0403ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Yes

Alert Category

Critical - Hard Disk drive

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0176

374

IBM NeXtScale nx360 M4 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M4



































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NeXtScale nx360 M4

Reviews:

Related manuals for NeXtScale nx360 M4

Brands by name

Popular brands

Lenovo NeXtScale nx360 M4, Installation And Service Manual

Search results

Summary of Contents for NeXtScale nx360 M4

Reviews:

Related manuals for NeXtScale nx360 M4

Brands by name

Popular brands