13. Others
271
∫
Wi-Fi function
∫
Others
[Failed to connect wireless access point]/[Connection failed]/[No destination
found]
• The wireless access point information set on the camera is wrong.
Check the authentication type, encryption type, and encryption key. (
>
249)
• It may not be possible to connect to a wireless access point depending on the transmission
condition of other devices. Check the status of other devices that are connected to the
wireless access point and devices that use the 2.4 GHz frequency.
[Connection failed. Please retry in a few minutes.]/[Network disconnected. Transfer
stopped.]
• Transmission from the wireless access point are getting weak.
Perform the connection closer to the wireless access point.
• Depending on the wireless access point, the connection may be automatically disconnected
after specific time has passed.
Reconnect the connection again.
[Connection failed]
• Change the access point to connect to in the smartphone Wi-Fi settings to the camera.
[Some pictures cannot be deleted]/[This picture cannot be deleted]
• This only with pictures that comply with the DCF standard (
>
158).
Perform formatting
(
>
28) on this camera after saving necessary data on a computer, etc.
[Cannot be set on this picture]
• Images that do not comply with the DCF standard (
>
158) cannot be edited on the camera.
[A folder cannot be created]
• A folder cannot be created because there are no remaining folder numbers that can be used.
Perform formatting
(
>
28) on this camera after saving necessary data on a computer, etc.
If you execute [No.Reset] in the [Setup] menu after formatting, the folder number is reset to
100. (
>
203)
[Please turn camera off and then on again]/[Lens not detected. Please turn camera
on again.]/[System Error]
• Turn the camera off and on. If the message is still displayed even after repeating this a few
times, contact the dealer where you purchased the camera.