11. Using the Wi-Fi/Bluetooth function
253
[Wi-Fi Setup] Menu
The items in this menu section serve to configure the settings required for the Wi-Fi function.
The settings cannot be changed when connected to Wi-Fi.
This item allows setting the higher priority between the camera and smartphone to perform
operations during remote recording. (
>
235)
This item allows you to improve security by enabling password entry for a direct connection to a smartphone.
• When [ON] is selected, you can also set up a connection by scanning a QR code.
This item allows you to change the name (SSID) of this camera.
1
Press [DISP].
2
Enter the desired device name.
• For information on how to enter characters, refer to (
>
55).
• A maximum of 32 characters can be entered.
To prevent incorrect operation and use of the Wi-Fi function by a third party and to protect
saved personal information, we recommend protecting the Wi-Fi function with a password.
• Once a password is set, you are required to enter it each time you use the Wi-Fi function.
• If you forget the password, you can reset it with [Reset Network Settings] in the [Setup] menu.
This item displays the MAC address and IP address of this camera.
• A MAC Address is a unique address that is used to identify network equipment.
• IP address refers to a number that identifies a computer connected to a network such as the
Internet. Usually, the addresses for homes are automatically assigned by the DHCP function
such as a wireless access point. (Example: 192.168.0.87)
The technical compliance standard authentication number is displayed.
>
[Setup]
>
[Wi-Fi]
>
[Wi-Fi Setup]
[Priority of Remote Device]
[Wi-Fi Password]
[ON]
Connects the camera and a smartphone using an SSID and password. (
>
228)
[OFF]
Connects the camera and a smartphone using an SSID. (
>
230)
[Device Name]
[Wi-Fi Function Lock]
[Setup]
Enter any 4-digit numbers as the password.
• For information on how to enter characters, refer to (
>
55).
[Cancel]
Cancel the password.
[Network Address]
[Approved Regulations]
MENU
