2. Getting Started/Basic Operations
35
You can determine how much of a subject is to be captured / how large a subject is to be
rendered by selecting the appropriate focal length, i.e. by zooming.
• You can also use the zoom function from the touch panel. (
>
145)
• For details about zoom types and use, refer to (
>
141).
Zooming (changing the lens' focal length)
Zoom lever
Control ring
Turn the zoom lever
• The operation of the zoom lever is indicated
as shown below in these instructions.
Rotate the zoom lever:
Turn the control ring
¢
¢
You can perform zoom operation by
assigning the [Zoom] setting to the control
ring. (
>
54)
[T] side:
Telephoto, Enlarges the subject, reduces the
captured area
[W] side:
Wide-angle, Captures a larger area, reduces
the captured subjects' sizes
Clockwise:
Telephoto, Enlarges the subject, reduces the
captured area
Counterclockwise:
Wide-angle, Captures a larger area, reduces
the captured subjects' sizes
• Do not touch the lens barrel during zooming.
• Adjust the focus setting after zooming.
• The camera may make a rattling noise and vibrate when the zoom lever or control ring is
operated. This is not a malfunction.
