11. Using the Wi-Fi/Bluetooth function
223
Wi-Fi function/Bluetooth function
∫
Before Use
• Set the clock. (
>
31)
• To use the Wi-Fi function on the camera, a wireless access point or a destination device
equipped with the wireless LAN function is required.
∫
About the WIRELESS connection lamp
• In [Wireless Connection Lamp] in the [Setup] menu, you can set the
lamp so that it will not light up/flash. (
>
197)
∫
About the [Wi-Fi] button
In these instructions, a function button to which [Wi-Fi] is assigned is referred to as the
[Wi-Fi] button.
(By default, [Wi-Fi] is assigned to [Fn6] when the camera is in Recording mode, and to
[Fn1] when the camera is in Playback mode.)
• For information about the function button, refer to (
>
49).
Steps for pressing [Wi-Fi] (in Recording mode)
1
Touch [ ].
2
Touch [
].
Lit blue
When the Wi-Fi/Bluetooth function is turned on or
connected
Flashing blue
When sending image data by operating the camera
Fn10
Fn10
Fn10
Fn6
Fn6
Fn6
OFF
OFF
OFF
Fn8
Fn8
Fn8
Fn7
Fn7
Fn7
Fn9
Fn9
Fn9
OFF
OFF
OFF
Fn6