Kyocera Copystar CS 3011i, Service Manual

Page: 558 / 772

2RG/2RH
2-4-23
F51X
F52X
F53X
F55X
F56X
F57X Abnormality detecting in a JOB execution part 1. Initialize HDD and perform an operation check.
(FULL of U024) *
2. Carry out U021 Main backup initialization and perform an operation check.
3. Exchange a Main board and perform an operation check.
4. Exchange HDD and perform an operation check.
*
5. Get USBLOG and contact service headquarters.
* Only HDD standard model
Since the USB log immediately after occur-
rence is needed for analysis, please give
me cooperation of acquisition.
F58X
F59X
F5AX
F5BX
F5CX
F5DX
F5EX
Abnormality detecting in the various-services
Management Department 1. Initialize HDD and perform an operation check.
(FULL of U024) *
2. Carry out U021 Main backup initialization and perform an operation check.
3. Exchange a Main board and perform an operation check.
4. Exchange HDD and perform an operation check.
*
5. Get USBLOG and contact service headquarters.
* Only HDD standard model
Since the USB log at the time of occur-
rence is needed for analysis, please give
me cooperation of acquisition. F5DX (especially if X is 9,A,B,C or D)
occurs when processing FAX reception
and URDS related matter.
When occurred, check data sent from
PC.
F5FX Abnormality detecting in a service execution
part 1. Initialize HDD and perform an operation check.
(FULL of U024) *
2. Carry out U021 Main backup initialization and perform an operation check.
3. Exchange a Main board and perform an operation check.
4. Exchange HDD and perform an operation check.
*
5. Get USBLOG and contact service headquarters.
* Only HDD standard model
Since the USB log immediately after occur-
rence is needed for analysis, please give
me cooperation of acquisition.
F62X Abnormality detecting in a service execution
part 1. Initialize HDD and perform an operation check.
(FULL of U024) *
2. Carry out U021 Main backup initialization and perform an operation check.
3. Exchange a Main board and perform an operation check.
4. Exchange HDD and perform an operation check.
*
5. Get USBLOG and contact service headquarters.
* Only HDD standard model
Since the USB log at the time of occur-
rence is needed for analysis, please give
me cooperation of acquisition. USB log at the time of occurrence is
required for the analysis.
F63X Abnormality detecting in a device control sec-
tion 1. Initialize HDD and perform an operation check.
(FULL of U024) *
2. Carry out U021 Main backup initialization and perform an operation check.
3. Exchange a Main board and perform an operation check.
4. Exchange HDD and perform an operation check.
*
5. Get USBLOG and contact service headquarters.
* Only HDD standard model
F68X Abnormality detecting in a storage device con-
trol section 1. Initialize HDD and perform an operation check.
(FULL of U024) *
2. Carry out U021 Main backup initialization and perform an operation check.
3. Exchange a Main board and perform an operation check.
4. Exchange HDD and perform an operation check.
*
5. Get USBLOG and contact service headquarters.
* Only HDD standard model
* F684 is the overwrite error at the time of
an HDD security kit. Each of the SSD / HDD to check the
operation after initializing. (U024 of SSD
/ FULL, U024 of HDD / FULL)
Number Contents Verification procedure & check point Remarks Content