Kyocera Copystar CS 3011i, Service Manual

Page: 357 / 772

2RG/2RH
1-4-64
9140 Sensor error in coin vender
change (Yen 100)
Change is empty despite
change is enough.
Coin jam in the
change tube Check visually and remedy.
Contact in the
connector Check the connection of the empty change
sensor.
Change empty
sensor Replace the coin mec.
Coin vender control
PWB Replace the coin mec.
9150 Sensor error in coin vender
change (Yen 500)
Change is empty despite
change is enough.
Change tube Check no exchange jam is observed at the
outlet and, if necessary, repair it.
Contact in the
connector Check the connection of the empty change
sensor.
Change empty
sensor
Replace the coin mec.
Coin vender control
PWB Replace the coin mec.
9160 Coin vender pay-out error
Coin is paid out despite the
pay-out motor is determined
not active.
Pay-out motor Replace the coin mec.
9170 Coin vender pay-out sensor
error
Coin is paid out despite the
pay-out motor is determined
not active.
Pay-out area Check no exchange jam is observed at the
outlet and, if necessary, repair it.
Pay-out motor Replace the coin mec.
Pay-out sensor Replace the coin mec.
Code Contents Related parts
Check procedures/
corrective measures