n
Empty the pulp container.
n
Replace the cover (a6) by locking in place over the outlet (a5).
6 -
GRATING/SLICING (depending on model) (k)
Accessories used:
- Vegetable cutter (k)
F
ITTING THE ACCESSORY
:
n
Place a drum (k4) (k5) (k6) (k7) in the drum body (k2). Hook the drum latch (k3) on the body to maintain
the drum in its housing. (Fig. 6a)
n
Place the cover (a8) under the multifunction head (a4), and push it to lock it (a click should be heard).
(Fig. 6b)
n
Remove the cover (a10) from the outlet (a9). Check that the cover (a6) is locked on the outlet (a5). (Fig.
6b)
n
Insert sure that the appliance is turned off. Place the assembled vegetable cutter (k) tilted towards you,
facing the outlet (a9) and engage the vegetable cutter fully.
n
Rotate the feed tube to the rear until it locks in place. (Fig. 6c)
n
Place a large bowl or the bowl (b1) under the vegetable cutter to collect the ingredients.
T
IPS
:
Grating: speed 8 to 10
n
Use the grater drum (k4) to grate emmental, carrots, etc. finely.
n
Use the coarse grater drum (k6) to grate carrots into Julienne strips, courgettes, cooked beetroot, etc.
Slicing: speed 6 to 8
n
Use the thin slicer drum (k5) to slice carrots, courgettes, potatoes, etc.
Scraping: speed 10 to 12
n
Use the scraper drum (k7) to reduce potatoes, Parmesan, etc. into thin strips.
S
TARTING
:
n
Turn the speed control knob (a1) to the desired setting.
n
Wait for a few seconds until the appliance reaches the desired speed.
n
Insert the vegetables cut into pieces through the feed tube on the container (k2); push them with the
pusher (k1);
Never use your fingers, cutlery or any other utensil.
(Fig. 6d)
n
To stop the appliance, turn the speed control knob (a1) to 0.
R
EMOVING THE ACCESSORIES
:
n
Wait for the appliance to come to a standstill.
n
Rotate the feed tube to the front.
n
Release the drum body from the outlet (a9).
n
Release the drum latch (k3).
7 -
MAKING FRESH PASTA (depending on model) (l) (m) (n)
A
CCESSORIES USED
:
- Pasta rolling mill (l)
- Pasta dies (m)
- Pasta dryer (n)
F
ITTING THE ACCESSORIES
:
n
Place the cover (a8) under the multifunction head (a4), and push it to lock it (a click should be heard).
(Fig. 7a)
n
Remove the cover (a10) from the outlet (a9).
n
Check that the cover (a6) is locked on the outlet (a5). (Fig. 7a)
n
Make sure that the appliance is turned off.
n
Insert the rolling mill (l) or pasta dies (m2) (m3) (m4) tilted towards you, facing the outlet (a9), and engage
them fully into the outlet (a9). Rotate them a quarter turn to the rear until they lock into place. (Fig. 7b)
English
27
