Korg M3 Parameter Manual Download Page 210

Page: 210 / 647

Sequencer mode

200

▼

0–1–3(4): Menu Command

• 0: Memory Status

☞

p.271

• 1: Panel–SW Solo Mode On

☞

p.106

• 2: Exclusive Solo

• 3: Rename Song

• 4: Delete Song

• 5: Copy From Song

☞

p.271

• 6: Load Template Song

☞

p.271

• 7: Save Template Song (Save as User Template

Song)

☞

p.272

• 8: FF/REW Speed

☞

p.272

• 9: Set Location (Set Location for Locate Key)

☞

p.272

• 10: GM Initialize

☞

p.273

• 11: Copy From Combi (Copy from

Combination)

☞

p.273

• 12: Copy from Program

☞

p.273

• 13: Copy X–Y Motion

☞

p.107

For more information, please see “Sequencer: Menu
Command” on page 271.

0–1–5: PlayLoop T01–08,
0–1–6: PlayLoop T09–16

When playing or recording a song, you can independently
loop the MIDI tracks.

0–1–5(6)a: Location, Meter, Tempo,

Tempo Mode, Song Select,
Track Select, Reso, RPPR

For more information, please see “0–1–1: Program T01–08,
0–1–2: Program T09–16” on page 195.

0–1–5(6)b: Play Loop

Selected Track Info

This displays information about the currently selected MIDI
track. For more information, please see “0–1–1(2)b: Track
Program Select” on page 197.

Track 01 (Track Number):

Category

[Category Name]

Indicates the category.

Track Play Loop

[Off, On]

Specifies looping for a MIDI track.

On (checked):

That track will loop between Loop Start

Measure

and Loop End Measure.

Loop Start Measure

[001...999]

Specifies the first measure of the loop.

Loop End Measure

[001...999]

Specifies the last measure of the loop.

Play Intro

[Off, On]

On (checked):

After the measures before the specified Loop

Start Measure

are played once, the region of Loop Start

Measure

– Loop End Measure will be played repeatedly.

For example, you can use this on a drum track to make it
play a fill-in and then begin looping.

Off (unchecked):

Playback will begin from the Loop Start

Measure

, and will begin looping immediately.

This will be valid if Track Play Loop is checked and
Loop Start Measure

is set to other than 001.

0–1

–5b

0–1

–5a

0–1

–5

Summary of Contents for M3








































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for M3

Reviews:

Related manuals for M3

Brands by name

Popular brands

Korg M3, Parameter Manual

Search results

Summary of Contents for M3

Reviews:

Related manuals for M3

Brands by name

Popular brands