manualshive.com logo in svg

Korg M3, Parameter Manual

Share
Download
Korg M3 Parameter Manual Download Page 330

Sampling mode

320

4–7: Pads 1–4 Setup, 
4–8: Pads 5–8 Setup

Here you can specify the note numbers (and their velocities) 
that will be produced by pads 1–8 in Sampling mode. You 
can assign up to eight note numbers (and their velocities) to 
each pad.

4–7(8)a: Pads 1

1

[Off, C–1...G9 / 001...127]

2

[Off, C–1...G9 / 001...127]

3

[Off, C–1...G9 / 001...127]

4

[Off, C–1...G9 / 001...127]

5

[Off, C–1...G9 / 001...127]

6

[Off, C–1...G9 / 001...127]

7

[Off, C–1...G9 / 001...127]

8

[Off, C–1...G9 / 001...127]

Off:

 Choose this if you don’t want the pad to play a note.

C–1…G9:

 Specify the note number you want to play.

001…127: 

Specify the velocity value.

For details on these settings and how to use the pads, please 
see “1–7: Pads 1–4 Setup” on page 36 and “Note: Changing 
velocity on the keyboard or pads” on page 299.

4–7(8)b: Pads 2...8

The parameters are identical to those for Pads 1, as 
described under “4–7(8)a: Pads 1,” above.

▼

4–7(8): Menu Command

• 0: Panel–SW Solo Mode On

☞

p.329

• 1: Exclusive Solo

☞

p.329

• 2: Delete Sample

☞

p.329

• 3: Copy Sample

☞

p.330

• 4: Rename Sample

☞

p.330

• 5: Move Sample

☞

p.330

• 6: Sample Mono To Stereo (Change Sample 

Type)

☞

p.331

• 7: Delete MS (Delete Multisample)

☞

p.331

• 8: Copy MS (Copy Multisample)

☞

p.332

• 9: Rename MS (Rename Multisample)

☞

p.332

• 10: Move MS (Move Multisample)

☞

p.332

• 11: Convert MS To Program (Convert Multisample To 

Program)

☞

p.333

• 12: MS Mono To Stereo

☞

p.333

• 12: MS Stereo To Mono

☞

p.333

• 13: Optimize RAM

☞

p.334

• 14: Select Directory

☞

p.334

• 15: Keyboard Display

☞

p.334

• 16: Auto Sampling Setup

☞

p.334

For more information, please see “Sampling: Menu 
Command” on page 329.

4–8a

4–8
Menu

Summary of Contents for M3








































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands