Korg M3, Parameter Manual

Page: 468 / 647

Effect Guide
458
Chorus, Flanger, and Phaser (Cho/Fln Phaser)
026: Stereo Chorus
This effect adds thickness and warmth to the sound by
modulating the delay time of the input signal. You can add
spread to the sound by offsetting the phase of the left and
right LFOs from each other.
e: L Pre Delay [msec]
e: R Pre Delay [msec]
Setting the left and right delay time individually allows you
to control the stereo image.
027: St.HarmonicChorus
(Stereo Harmonic Chorus)
This effect applies chorus only to higher frequencies. This
can be used to apply a chorus effect to a bass sound without
making the sound thinner. You can also use this chorus
block with feedback as a flanger.
a
LFO
Waveform Triangle,
Sine
Selects the LFO Waveform
LFO Phase
[degree]
–180...+180
Sets the LFO phase difference
between the left and right
p.449
b
LFO
Frequency
[Hz]
0.02...20.00 Sets the speed of the LFO p.449
Src Off...Tempo
Selects a modulation source for
LFO speed
Amt
–20.00...
+20.00 Sets the modulation amount of
LFO speed
c
MIDI Sync Off, On
When this is on, the LFO speed
is set by BPM, Base Note, and
Times, instead of Frequency
p.448
BPM
MIDI,
40.00...
300.00
MIDI syncs to the system
tempo; 40–300 sets the tempo
manually for this individual
effect
p.448
Base Note ...
Selects the type of notes that
specify the LFO speed
p.448
Times x1...x32
Sets the number of notes that
specify the LFO speed
p.448
d
LFO Type
Individual,
Common1,
Common2 Selects either (individual) LFO,
Common FX LFO1, or Common
LFO2
p.448
CmnLFO
Offset [deg]
–180...+180
Sets the phase offset when
Type = Common 1 or Common
2
p.448
e
L Pre Delay
[msec]
0.0...50.0
Sets the delay time for the left
channel
p.458
R Pre Delay
[msec]
0.0...50.0
Sets the delay time for the right
channel
p.458
f
Depth 0...100
Sets the depth of LFO
modulation
Src Off...Tempo
Selects the modulation source
for the LFO modulation depth
Amt –100...+100
Sets the modulation amount of
the LFO modulation depth
g EQ Trim 0...100 Sets the EQ input level
h
Pre LEQ Fc
Low,
Mid-Low
Selects the cutoff frequency
(low or mid-low) of the low-
range equalizer
Pre HEQ Fc
High,
Mid-High
Selects the cutoff frequency
(high or mid-high) of the high-
range equalizer
i
Pre LEQ Gain
[dB]
–15.0...+15.0 Sets the gain of the Low EQ
Pre HEQ Gain
[dB]
–15.0...+15.0 Sets the gain of the High EQ
j
Wet/Dry
–Wet...
–1 : 99, Dry,
1 : 99...Wet Sets the balance between the
effect and the dry input
p.450
Src Off...Tempo
Selects a modulation source for
Wet/Dry
Amt –100...+100
Sets the modulation amount
for Wet/Dry
Chorus
Chorus
Left
Right
LFO Phase
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
EQ Trim
EQ Trim
LEQ HEQ
LEQ HEQ
LFO: Tri / Sine
a
LFO
Waveform Triangle,
Sine
Selects the LFO Waveform
LFO Phase
[degree]
–180...+180
Sets the LFO phase difference
between the left and right
p.449
b
LFO
Frequency
[Hz]
0.02...20.00 Sets the speed of the LFO p.449
Src Off...Tempo
Selects a modulation source for
LFO speed
Amt
–20.00...
+20.00 Sets the modulation amount of
LFO speed
c
MIDI Sync Off, On
When this is on, the LFO speed
is set by BPM, Base Note, and
Times, instead of Frequency
p.448
BPM
MIDI,
40.00...
300.00
MIDI syncs to the system
tempo; 40–300 sets the tempo
manually for this individual
effect
p.448
Base Note ...
Selects the type of notes that
specify the LFO speed
p.448
Times x1...x32
Sets the number of notes that
specify the LFO speed
p.448
d
LFO Type
Individual,
Common1,
Common2 Selects either (individual) LFO,
Common FX LFO1, or Common
LFO2
p.448
CmnLFO
Offset [deg]
–180...+180
Sets the phase offset when
Type = Common 1 or Common
2
p.448
e
Pre Delay
[msec]
0.0...50.0
Sets the delay time from the
original sound
f
Depth 0...100
Sets the depth of LFO
modulation
Src Off...Tempo
Selects the modulation source
of the LFO modulation depth
Amt –100...+100
Sets the modulation amount of
the LFO modulation depth
g
High/Low
Split Point
1...100
Sets the frequency split point
between the low and high
range
p.459
h
Feedback –100...+100
Sets the feed back amount of
the chorus block
p.459
High Damp
[%]
0...100
Sets the high range damping
amount of the chorus block
i
Low Level 0...100 Sets the low range output level
High Level 0...100
Sets the high range (chorus)
output level
Left
Right
Feedback
LFO Phase
LFO: Tri / Sine
Wet / Dry
Wet / Dry
High Damp
Stereo In - Stereo Out
Low Level
Low Level
High Level
High Level
High/Low Split Point
High Damp
Chorus/Flanger
Chorus/Flanger