manualshive.com logo in svg

Korg M3, Parameter Manual

Share
Download
Korg M3 Parameter Manual Download Page 250

Sequencer mode

240

5–2–3: –6 T01–08, 
5–2–4: –6 T09–16

5–2–3(4)a: Track Select, Tempo, RPPR
5–2–3(4)b: Track Info

For more information, please see “2–1: Trim T01–08, 2–2: 
Trim T09–16” on page 224.

5–2–3(4)c: MIDI Filter3

Track 01 (Track Number):

Enable Other Control Change Messages [Off, On]

Specifies whether or not MIDI control messages not covered 
in the preceding items MIDI Filter will be received.

Enable KARMA Waveform SysEx

[Off, On]

This allows you to enable or disable the System Exclusive 
messages used by KARMA Wave Sequencing.

Track 02...08, 09...16 (Track Number):

These are the MIDI Filter 6 settings for MIDI tracks 2–8 and 
9–16. They are the same as for track 1. For more information, 
please see “Track 01 (Track Number):,” above.

▼

5–2–3(4): Menu Command

• 0: Memory Status

☞

p.271

• 1: Panel–SW Solo Mode On

☞

p.106

• 2: Exclusive Solo

☞

p.107

• 3: Rename Song

☞

p.271

• 4: Delete Song

☞

p.271

• 5: Copy From Song

☞

p.271

• 6: Load Template Song

☞

p.271

• 7: Save Template Song (Save as User Template 

Song)

☞

p.272

• 8: FF/REW Speed

☞

p.272

• 9: Set Location (Set Location for Locate Key)

☞

p.272

• 10: GM Initialize

☞

p.273

• 11: Copy From Combi (Copy from 

Combination)

☞

p.273

• 12: Copy from Program

☞

p.273

For more information, please see “Sequencer: Menu 
Command” on page 271.

5–2

–3c

5–2

–3b

5–2

–3a

5–2

–3

Menu

Summary of Contents for M3








































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands