manualshive.com logo in svg

Korg M3, Parameter Manual

Share
Download
Korg M3 Parameter Manual Download Page 247

SEQ P5–1: MIDI Filter 1 5–1–5: –3 T01–08, 5–1–6: –3 T09–16

237

5–1–5: –3 T01–08, 
5–1–6: –3 T09–16

Here you can enable transmission for the REALTIME 
CONTROLS 1–4 sliders. The MIDI control messages of 1–4 
sliders are fixed.

5–1–5(6)a: Track Select, Tempo, RPPR
5–1–5(6)b: Track Info

For more information, please see “2–1: Trim T01–08, 2–2: 
Trim T09–16” on page 224.

5–1–5(6)c: MIDI Filter 3

Track 01 (Track Number):

Enable Realtime Control Slider-1

[Off, On]

Specifies whether Slider 1 MIDI CC#74 (the M3’s filter cutoff 
frequency) will be received.

Enable Realtime Control Slider-2

[Off, On]

Specifies whether or not Slider 2 MIDI CC#71 (the M3’s filter 
resonance) will be received.

Enable Realtime Control Slider-3

[Off, On]

Specifies whether or not Slider 3 MIDI CC#79 (the M3’s filter 
EG intensity) will be received.

Enable Realtime Control Slider-4

[Off, On]

Specifies whether or not Slider 4 MIDI CC#72 (the M3’s 
filter/amp EG release time) will be received.

Track 02...08, 09...16 (Track Number):

These are the MIDI Filter 3 settings for MIDI tracks 2–8 and 
9–16. They are the same as for track 1. For more information, 
please see “Track 01 (Track Number):,” above.

▼

5–1–5(6): Menu Command

• 0: Memory Status

☞

p.271

• 1: Panel–SW Solo Mode On

☞

p.106

• 2: Exclusive Solo

☞

p.107

• 3: Rename Song

☞

p.271

• 4: Delete Song

☞

p.271

• 5: Copy From Song

☞

p.271

• 6: Load Template Song

☞

p.271

• 7: Save Template Song (Save as User Template 

Song)

☞

p.272

• 8: FF/REW Speed

☞

p.272

• 9: Set Location (Set Location for Locate Key)

☞

p.272

• 10: GM Initialize

☞

p.273

• 11: Copy From Combi (Copy from 

Combination)

☞

p.273

• 12: Copy from Program

☞

p.273

For more information, please see “Sequencer: Menu 
Command” on page 271.

5–1

–5c

5–1

–5b

5–1

–5a

5–1

–5

Menu

Summary of Contents for M3








































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands