manualshive.com logo in svg

Korg M3, Parameter Manual

Share
Download
Korg M3 Parameter Manual Download Page 249

SEQ P5–2: MIDI Filter 2 5–2–1: –5 T01–08, 5–2–2: –5 T09–16

239

SEQ P5–2: MIDI Filter 2

5–2–1: –5 T01–08, 
5–2–2: –5 T09–16

5–2–1(2)a: Track Select, Tempo, RPPR
5–2–1(2)b: Track Info

For more information, please see “2–1: Trim T01–08, 2–2: 
Trim T09–16” on page 224.

5–2–1(2)c: MIDI Filter

Track 01 (Track Number):

Enable SW1

[Off, On]

Enable SW2

[Off, On]

Specifies whether or not the effect of the SW1 and SW2 
switches will be received.

SW1 and SW2 are controlled by the KYBD-61/73/88’s SW1 
and SW2 switches.

The function of these switches is specified in the P1: DT/
XY/Ctrls– Controllers Setup page.

These settings are valid if these keys are assigned to SW1 
Mod. (CC#80), SW2 Mod. (CC#81), or Portamento SW 
(CC#65).

Enable Foot Switch

[Off, On]

Specifies whether or not the effect of the ASSIGNABLE 
SWITCH will be received. The function is assigned in Global 
P2: Controllers– Foot Controllers page.
This filter setting is valid when a MIDI control change is 
assigned.

Enable Foot Pedal

[Off, On]

Specifies whether or not the effect of the ASSIGNABLE 
PEDAL will be received. The function is assigned in Global 
P2: Controllers– Foot Controllers page.
This filter setting is valid when a MIDI control change is 
assigned.

Track 02...08, 09...16 (Track Number):

These are the MIDI Filter 5 settings for MIDI tracks 2–8 and 
9–16. They are the same as for track 1. For more information, 
please see “Track 01 (Track Number):,” above.

▼

5–2–1(2): Menu Command

• 0: Memory Status

☞

p.271

• 1: Panel–SW Solo Mode On

☞

p.106

• 2: Exclusive Solo

☞

p.107

• 3: Rename Song

☞

p.271

• 4: Delete Song

☞

p.271

• 5: Copy From Song

☞

p.271

• 6: Load Template Song

☞

p.271

• 7: Save Template Song (Save as User Template 

Song)

☞

p.272

• 8: FF/REW Speed

☞

p.272

• 9: Set Location (Set Location for Locate Key)

☞

p.272

• 10: GM Initialize

☞

p.273

• 11: Copy From Combi (Copy from 

Combination)

☞

p.273

• 12: Copy from Program

☞

p.273

For more information, please see “Sequencer: Menu 
Command” on page 271.

5–2

–1c

5–2

–1b

5–2

–1a

5–2

–1

Menu

Summary of Contents for M3








































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands