manualshive.com logo in svg

Korg M3, Parameter Manual

Share
Download
Korg M3 Parameter Manual Download Page 108

Program mode

98

PROG P8: IFX (Insert Effect)

These pages let you can make settings for the insert effects. 
For instance, you can:

• Send the output of a oscillator to an insert effect

• Route a sound to an insert effect

• Make detailed settings for insert effects

• Make common LFO settings for effects

For more information, please see “Effect Guide” on 
page 421.

8–1: Routing

8–1a: Routing Map

This graphic shows an overview of the insert effects, 
including the routing of the oscillators to the effects, the 
effects names and on/off status, chaining between the 
effects, and the output bus to which the insert effects are 
themselves routed.

This page lets you adjust the routing of the oscillators to the 
insert effects. To adjust the other settings shown in this 
graphic, please see “8–2: Insert FX Setup,” as described on 
page 99.

8–1b: Bus Select (All OSCs to)

Bus (IFX/Output) Select

[L/R, IFX1...5, 1...4, 1/2, 3/4, Off]

This specifies the output bus for oscillators 1 and 2.

L/R:

 The oscillators will be output to the L/R bus. Normally 

you will choose L/R.

IFX1…5:

 Output to the IFX1–5 busses.

1, 2, 3, 4:

 The oscillator will be output in mono from the 

corresponding AUDIO OUTPUT (INDIVIDUAL).

1/2, 3/4:

 The oscillator will be output in stereo according to 

its pan setting (4–1c, 4–5: Amp2/Driver2) from the 
corresponding AUDIO OUTPUT (INDIVIDUAL) pair.

Off:

 The oscillator will not be output from the L/R bus, 

IFX1–5 busses, or Individual 1–4 busses. Choose the Off 
setting if you want the program oscillator output of the 
timbre to be connected in series to a master effect. Use 
Send1 (to MFX1)

 and Send2 (to MFX2) to specify the send 

levels.

FX Control Bus

[Off, 1, 2]

Sends the output of the oscillator 1, 2 to an FX Control bus 
(two-channel mono FX Ctrl 1 or 2).

Use the FX Control busses when you want a separate sound 
to control the audio input of an effect. You can use two FX 

Control busses (each is a two-channel mono bus) to control 
effects in various ways.

For more information, please see “FX Control Buses” on 
page 423.

AUX Bus

[Off, 1, 2, 3, 4, 1/2, 3/4]

These settings send the output of the oscillator 1, 2 to the 
AUX busses (four mono channels: 1, 2, 3, 4).

The AUX buses are internal buses used in each mode for 
sampling, etc.

In Program mode, you can resample your keyboard or 
KARMA performance, or sample an external audio signal 
from the AUDIO INPUT jacks.

In order for you to sample, Source Bus must be set to a AUX 
bus.

Normally, you will select L/R as the Source Bus so that you 
can sample the signal of the L/R bus (e.g., your keyboard 
performance and the KARMA function’s performance). 
However, you can use the AUX buses if you want to sample 
an audio input processed by effects, while listening to your 
keyboard performance or KARMA performance via the L/R 
outputs. If desired, multiple audio inputs can be mixed to a 
AUX bus, or the direct signal from an audio input can be 
mixed to a AUX bus along with the sound from an insert 
effect and sampled. For more information, please see the 
diagram “Source Bus = AUX 1/2” on page 12.

Off:

 The signal will not be sent to a AUX bus. Normally you 

will leave this off.

1, 2, 3, 4:

 The output of the oscillator 1, 2 will be sent to the 

corresponding AUX bus. The Pan setting (Prog 4–1c, 4–5: 
Amp2/Driver2) of each oscillator will be ignored, and the 
signal will be sent in monaural.

1/2, 3/4:

 The output of the oscillator 1, 2 will be sent in stereo 

to the corresponding pair of AUX busses. The signal is sent 
in stereo to AUX busses 1/2 or 3/4 according to the Pan 
setting.

Note: If the EXB-RADIAS is installed, you will use the AUX 
buses to route signals from the mixer or effect section to the 
RADIAS’ oscillator or vocoder.

8–1c: Use Dkit Setting

Use DKit Setting

[Off, On]

This is shown if Oscillator Mode (Prog 1–1a) is set to 
Drums

. If Oscillator Mode is set to Single or Double, this 

setting is ignored.

On (checked):

 The Bus Select, FX Control Bus, Send 1, and 

Send 2

 settings (Global 5–4b) for each key of the selected 

drum kit will be used. Check this if you want to apply an 
individual insert effect to each drum instrument, or send it 
separately from an AUDIO OUTPUT (INDIVIDUAL).

Tip: In most preloaded drumkits, the drum instruments have 
the same Bus Select settings according to their type, as 
follows.

Snares 

→

 IFX1

Kicks 

→

 IFX2

Other

 →

 IFX3

Off (unchecked):

 The Bus Select (Prog 8–1b), FX Control 

Bus

 (Prog 8–1b), OSC MFX Send (Prog 8–1d) settings will 

be used. All drum instruments will be sent to the specified 
bus.

8–1a

8–1b

8–1d

8–1
Menu

8–1c

Summary of Contents for M3








































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands