Korg M3 Parameter Manual Download Page 185

Page: 185 / 647

COMBI P7–4: KARMA 4 7–4–3: Names Master

175

7–4–3: Names Master

Here you can select and edit the names of the master
KARMA Sliders and Switches.

7–4–3a: KARMA RTC Name

Select Real-Time Controls

[Slider, Switch]

Here you can choose whether you want to specify the names
for sliders or for switches.

Slider:

The names of KARMA Sliders 1–8 will be displayed.

Switch:

The names of KARMA Switches 1–8 will be

displayed.

7–4–3b: CAT., Names

Each Module Control layer has its own set of names for the 8
KARMA Sliders and 8 KARMA Switches.

Slider:

CAT. (Category)

This indicates the category of the program used by the
timbre that is being played from the KARMA Module.

This will indicate Multi if a single KARMA Module is
playing multiple timbres of differing categories.

Slider1…Slider8

[000 (no name)...571: Waveform Select [16]]

Select the names for KARMA Sliders 1–8.

On the M3, suitable names for the various functions are
provided as presets. The long name is shown at the left, and
the short name at the right.

You can also change or newly specify the slider assignments
and names.

Switch:

CAT. (Category)

For more information, please see “CAT. (Category),” above.

SW1…SW8

[000 (no name)...571: Waveform Select [16]]

Select the names for KARMA Switches 1–8. The long name
is shown at the left, and the short name at the right.

On the M3, suitable names for the various functions are
provided as presets.

You can also change or newly specify the switch
assignments and names.

▼

7–4–3: Menu Command

• 0: Write Combination

☞

p.185

• 1: Panel–SW Solo Mode On

☞

p.106

• 2: Exclusive Solo

☞

p.107

• 3: Copy KARMA Module

☞

p.114

• 4: Initialize KARMA Module

• 5: Copy Scene

• 6: Swap Scene

• 7: Capture Random Seed

☞

p.116

• 8: Copy from Program

☞

p.185

• 9: Auto Assign RTC Name

☞

p.117

For more information, please see “Combination: Menu
Command” on page 185.

7–4–4: Name Map A,
7–4–5: Name Map B,
7–4–6: Name Map C,
7–4–7: Name Map D

Here you can select and edit the names of the KARMA
Sliders and Switches for modules A, B, C, and D.

For more information, please see “7–4–3: Names Master,”
above.

7–4

–3a

7–4

–3

7–4

–3b

Summary of Contents for M3








































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for M3

Reviews:

Related manuals for M3

Brands by name

Popular brands

Korg M3, Parameter Manual

Search results

Summary of Contents for M3

Reviews:

Related manuals for M3

Brands by name

Popular brands