Korg M3, Parameter Manual

Page: 381 / 647

Global P2: Controllers 2–1: Foot Controllers
371
Global P2: Controllers
2–1: Foot Controllers
2–1a: Foot Switch & Pedal/Damper
Foot Switch Assign [List of Foot Switch Assign]
Selects the function that will be controlled by a pedal switch
(such as the optional Korg PS-1) connected to the
ASSIGNABLE SWITCH jack.
For a complete list of possible assignments, please see “Foot
Switch Assignments” on page 599.
Foot Pedal Assign [List of Foot Pedal Assign]
Selects the function that will be controlled by a foot volume
pedal (XVP-10 or EXP-2 option [sold separately]) connected
to the ASSIGNABLE PEDAL jack.
For a complete list of possible assignments, please see “Foot
Pedal Assignments” on page 600.
Damper Polarity [(–) KORG Standard, (+)]
Set this to match the polarity of the damper pedal connected
to the DAMPER jack. If the polarity does not match,
operating the damper pedal will not produce the correct
result. If no damper pedal is connected, set this to (–) KORG
Standard.
(–) KORG Standard: Use this setting for “open-type”
damper pedals, such as the optional Korg DS–1H.
(+): Use this setting for “closed-type” pedals.
Foot Switch Polarity [(–) KORG Standard, (+)]
Set this to match the polarity of the footswitch connected to
the ASSIGNABLE SWITCH jack. If the polarity does not
match, operating the damper pedal will not produce the
correct result. If no damper pedal is connected, set this to (–)
KORG Standard.
(–) KORG Standard: Use this setting for “open-type”
footswitches, such as the optional Korg PS–1.
(+):
Use this setting for “closed-type” pedals.
▼
2–1: Menu Command
• 0: Write Global Setting
☞
p.382
For more information, please see “Global: Menu Command”
on page 382.
2–2: MIDI CC# Assign
2–2a: KARMA Controllers
Here you can assign control change messages to the
KARMA switches and sliders.
When you operate a switch or slider, the assigned control
change message will be transmitted from the MIDI OUT
connector.
The assigned control change messages can also be received
from an external MIDI device connected to the MIDI IN
connector, and used to control the corresponding KARMA
function.
The default settings of each parameter are as shown in the
display above.
On/Off [Off, 000...119]
This assigns a control change message to the KARMA ON/
OFF switch.
Latch [Off, 000...119]
This assigns a control change message to the KARMA
LATCH switch.
Scene [Off, 000...119]
This assigns a control change message to the KARMA
SCENE switch.
SW 1 [Off, 000...119]
SW 2 [Off, 000...119]
SW 3 [Off, 000...119]
SW 4 [Off, 000...119]
SW 5 [Off, 000...119]
SW 6 [Off, 000...119]
SW 7 [Off, 000...119]
SW 8 [Off, 000...119]
These assign control change messages to each of the
KARMA Switches 1–8.
2–1a
2–1
Menu
2–2a
2–2b
2–2
Menu
2–2c