manualshive.com logo in svg

Korg M3, Parameter Manual

Share
Download
Korg M3 Parameter Manual Download Page 114

Program mode

104

TFX On/Off

[Off, On]

This turns total effect on/off. If this is off, the input will be 
passed directly through. The setting will alternate between 
on/off each time you press this.

Separately from this setting, you can use control change 
#95 to turn the total effect off. A value of 0 turns the 
total effect off, and values of 1–127 restore the original 
setting. The global MIDI channel specified by MIDI 
Channel

 (Global 1–1a) is used for this message.

9–1c: Master Volume

Master Volume

[000...127]

This specifies the final level of the audio output that has 
passed through total effect, and output from AUDIO 
OUTPUT (MAIN OUT) L/MONO and R.

▼

9–1: Menu Command

• 0: Write Program

☞

p.106

• 1: Panel–SW Solo Mode On

☞

p.106

• 2: Exclusive Solo

☞

p.107

• 3: Copy MFX/TFX

☞

p.118

• 4: Swap MFX/TFX

☞

p.118

For more information, please see “Program: Menu 
Command” on page 106.

9–2: MFX1

9–2a: MFX1

Here you can edit the parameters of the effect you choose for 
MFX1 in the P9: MFX/TFX– Routing page.

Effect dynamic modulation (Dmod) is controlled on the 
global MIDI Channel (Global 1–1a). For more 
information, please see “Dynamic Modulation Source 
List” on page 594.

MFX1 On/Off

[Off, On]

This turns master effect 1 on/off. It is linked with the on/off 
setting in the P9: MFX/TFX– Routing page.

The setting will alternate between On and Off each time you 
press this.

Separately from this setting, you can use CC#94 to turn 
Master effects 1/2 off. CC#95 will turn the Total effect 
off. A value of 0 is Off, and a value of 1–127 selects the 
original setting. This is controlled on the global MIDI 
channel specified by MIDI Channel (Global 1–1a).

Note: If Control Assign is RT Control, you can use switch 6 
to turn MFX1 on/off. MFX2 and TFX can be controlled by 
switches 7 and 8.

P (Effect Preset)

[P00, P01...15, U00...15, ---------------]

This selects the effect preset. For more information, please 
see “P (Effect Preset)” on page 101.

MFX1 Parameters

Here you can edit the parameters of the master effect 
selected in the P9: MFX/TFX– Routing page.

For details on the master effects, please see “Master Effects 
(MFX1, 2)” on page 432.

▼

9–2: Menu Command

• 0: Write Program

☞

p.106

• 1: Panel–SW Solo Mode On

☞

p.106

• 2: Exclusive Solo

☞

p.107

• 3: Copy MFX/TFX

☞

p.118

• 4: Swap MFX/TFX

☞

p.118

• 5: Write FX Preset

☞

p.118

For more information, please see “Program: Menu 
Command” on page 106.

9–2a

9–2
Menu

Summary of Contents for M3








































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands