manualshive.com logo in svg

Korg M3, Parameter Manual

Share
Download
Korg M3 Parameter Manual Download Page 304

Sequencer mode

294

3. In From Measure, specify the first measure in the copy 

source song. In To End of Measure, specify the last 
measure.

4. In To Song, specify the song into which the data will be 

converted.

If you select a new song, a dialog box will ask you for 
confirmation. Press the OK button to create a new song and 
copy the data to that song.

If you select an existing song that already contains settings 
and/or musical data, executing this command will erase the 
data of that song and rewrite it with the data from the copy 
source. Before you execute, be sure that you will not be 
losing important data.

5. If you check Replace to original Song in Cue List and 

execute this command, the Current Step song will be 
replaced by the newly created song.

If you execute without checking this box, the newly created 
song can be selected later for the desired step of the cue list.

6. To execute the Copy Song operation, press the OK but-

ton. To cancel, press the Cancel button.

Summary of Contents for M3








































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands