476
Delay
055: L/C/R Delay
This multitap delay outputs three Tap signals to the left,
right, and center respectively. You can also adjust the left
and right spread of the delay sound.
e: High Damp [%]
e: Low Damp [%]
These parameters set the damping amount of high range
and low range. The tone of the delayed sound becomes
darker and lighter as it feeds back.
g: Spread
This parameter sets the pan width of the effect sound. The
stereo image is widest with a value of 50, and the effect
sound of both channels is output from the center with a
value of 0.
056: Stereo/CrossDelay
This is a stereo delay, and can by used as a cross-feedback
delay effect in which the delay sounds cross over between
the left and right by changing the feedback routing.
a
L Delay Time
[msec]
0...2730
Sets the delay time of TapL
Level
0...50
Sets the output level of TapL
b
C Delay Time
[msec]
0...2730
Sets the delay time of TapC
Level
0...50
Sets the output level of TapC
c
R Delay Time
[msec]
0...2730
Sets the delay time of TapR
Level
0...50
Sets the output level of TapR
d
Feedback
(C Delay)
–100...+100
Sets the feedback amount of
TapC
Src
Off...Tempo
Selects the modulation source
of the TapC feedback amount
Amt
–100...+100
Sets the modulation amount of
the TapC feedback amount
e
High Damp
[%]
0...100
Sets the damping amount in
the high range
Low Damp
[%]
0...100
Sets the damping amount in
the low range
f
Input Level
Dmod [%]
–100...+100
Sets the modulation amount of
the input level
Src
Off...Tempo
Selects the modulation source
for the input level
g
Spread
0...50
Sets the width of the stereo
image of the effect sound
h
Wet/Dry
Dry, 1 : 99...
99 : 1, Wet
Sets the balance between the
effect and the dry input
Src
Off...Tempo
Selects a modulation source for
Wet/Dry
Amt
–100...+100
Sets the modulation amount
for Wet/Dry
C Delay
R Delay
Left
Right
Feedback
Spread
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Input Level D-mod
High Damp Low Damp
L Delay
Input Level D-mod
+
Level
Level
Level
a
Stereo/Cross Stereo, Cross
Switches between stereo delay
and cross-feedback delay
b
L Delay Time
[msec]
0.0...1360.0
Sets the delay time for the left
channel
c
R Delay Time
[msec]
0.0...1360.0
Sets the delay time for the right
channel
d
L Feedback
–100...+100
Sets the feedback amount for
the left channel
Src
Off...Tempo
Selects the modulation source
of feedback amount
Amt L
–100...+100
Sets the modulation amount of
the left channel feedback
e
R Feedback
–100...+100
Sets the feedback amount for
the right channel
Amt R
–100...+100
Sets the modulation amount of
the right channel feedback
f
High Damp
[%]
0...100
Sets the damping amount in
the high range
g
Low Damp
[%]
0...100
Sets the damping amount in
the low range
h
Input Level
Dmod [%]
–100...+100
Sets the modulation amount of
the input level
Src
Off...Tempo
Selects the modulation source
for the input level
i
Spread
–50...+50
Sets the width of the stereo
image of the effect sound
j
Wet/Dry
Dry, 1 : 99...
99 : 1, Wet
Sets the balance between the
effect and the dry input
Src
Off...Tempo
Selects a modulation source for
Wet/Dry
Amt
–100...+100
Sets the modulation amount
for Wet/Dry
Delay
Delay
Stereo/Cross
Left
Right
Feedback
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
Input Level D-mod
Input Level D-mod
High Damp Low Damp
High Damp Low Damp
Spread
Stereo/Cross
Summary of Contents for M3
