manualshive.com logo in svg

Korg M3, Parameter Manual

The Philips M3 User Manual is a comprehensive guide designed to assist users in maximizing the features and functionalities of their Philips M3 device. It provides step-by-step instructions, troubleshooting tips, and important safety information. Download the free manual from manualshive.com to ensure smooth operation and easy navigation.

Share
Download
background image

Global mode

356

Global P0: Basic Setup

0–1: Basic

Here you can make master tune settings, turn all effects on/
off, and make on/off settings for the KARMA function.

0–1a: Basic

Master Tune

[–50cent (427.47Hz)...+50cent (452.89Hz)]

This adjusts the overall tuning of the entire M3 in one-cent 
units (semitone = 100 cents) over a range of ±50 cents. With a 
setting of 0, the frequency of A4 will be 440 Hz.

The A4 pitch given here is when Equal Temperament is 
selected as the scale. If a different scale is selected, A4 
may not be 440 Hz.

Key Transpose

[–12...+00...+12]

This adjusts the pitch in semitone steps over a ±1 octave 
range.

This setting is applied at the location (PreMIDI or PostMIDI) 
specified by Convert Position (Global 1–1a).

MIDI number transmitted by the KYBD-61/73/88

Note: If Convert Position is set to PreMIDI, the note 
numbers transmitted from the M3 will be affected by Key 
Transpose

 setting.

Master Tune

 can be controlled by the MIDI universal 

system exclusive message Master Fine Tuning (F0, 7F, 
nn, 04, 03, vv, mm, F7: nn=MIDI channel, vv/mm= 
value).
Key Transpose

 can be controlled by the MIDI universal 

system exclusive message Master Coarse Tuning (F0, 
7F, nn, 04, 04, vv, mm, F7: nn=MIDI channel, vv/
mm=value).

These messages are received on the global MIDI 
channel specified by MIDI Channel (Global 1–1a).

In Program, Combination, and Sequencer modes, MIDI 
RPN messages can be received to control the tuning 
and transposition of the program or timbre 
(Combination mode) or track (Sequencer mode). 
Incoming MIDI RPN Fine Tune messages will make 
relative adjustments to the tuning specified by the 
Master Tune

 setting.

MIDI RPN Coarse Tune messages will make relative 
adjustments to the pitch specified by the Key 
Transpose

 setting. In Program mode these messages 

will be received on the global MIDI channel specified 
by MIDI Channel (Global 1–1a), and in other modes 
they will be received on the MIDI channel specified for 
each timbre or track. (Transpose, Detune, Combi 3–
5(6)c, Seq 3–5(6)c)

Velocity Curve [1…9]

This specifies the way in which the volume and/or tone will 
change in response to variations in keyboard playing 
dynamics (velocity).

The curves you can select will depend on the Convert 
Position

 (Global 1–1a) setting. If the setting is PreMIDI, the 

curve is applied immediately after the keyboard. If the 
setting is PostMIDI, the curve is applied immediately before 
the sound generator.

In the case of PreMIDI, your keyboard playing dynamics are 
modified as shown by transmission curves 1–9 (lower left 
diagram), and reception is fixed at curve 4 linear (diagram at 
lower right).

In the case of PostMIDI, your keyboard playing dynamics 
are transmitted according to transmission curve 4 linear 
(lower left diagram), and will be interpreted according to 
reception curve 1–9 (lower right diagram).

If you’re using the M3 as a MIDI sound module and want to 
adjust the overall brightness of the sound, set Convert 
Position

 (1–1a) to PostMIDI and select the appropriate 

velocity curve.

1, 2, 3:

 An effect will be obtained for strongly-played notes

4 (Normal):

 The normal curve

5, 6:

 An effect will be obtained even if you do not play very 

strongly

7: 

This curve produces a relatively consistent effect for softly 

played notes.

8: 

This curve produces an even more consistent effect.

Each curve has its own characteristics, so you should select 
the curve that best suits your own playing style and the 
results you want to obtain.

9: 

Compared to the standard curve #4, this curve softens the 

response of gently-played notes. This allows velocity control 
with broader dynamics for sounds such as acoustic piano. 
This setting is particularly recommended for the M3-88.

Keys/Transpose

–12

0

+12

61 keys

24…84

(C1…C6)

36…96

(C2…C7)

48…108

(C3…C8)

73 keys

12…84

(C0…C6)

24…96

(C1…C7)

36…108

(C2…C8)

88 keys

9…96

(A–1…C7)

21…108

(A0…C8)

33…120

(A1…C9)

0–1a

0–1b

0–1c

0–1
Menu

For a setting of PostMIDI

Velocity (MIDI In

→

TG)

1

MAX

127

Velocity 
effect

For a setting of PreMIDI

Velocity (KBD

→

MIDI Out)

Soft

127

Strong

1

Received Table

Curve 4

Curve 1–9

Transmitted Table

Curve 1–9

PreMIDI

Global Convert Position

KBD

MIDI

Curve 4

TG

PostMIDI

1

8

6

5

4

3

2

7

1

2

3

8

6

5

4

7

9

9

Summary of Contents for M3








































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for M3

Laurell WS-650 lite Series Operation Manual preview
WS-650 lite Series
Brand: Laurell Pages: 84
NXP Semiconductors TWR-SB0410-36EVB User Manual preview
TWR-SB0410-36EVB
Brand: NXP Semiconductors Pages: 26
Clavister NetWall W20A Getting Started Manual preview
NetWall W20A
Brand: Clavister Pages: 89
Freescale Semiconductor MCF54455 Reference Manual preview
MCF54455
Brand: Freescale Semiconductor Pages: 921
Riverbed SteelCentral NetExpress Installation Manual preview
SteelCentral NetExpress
Brand: Riverbed Pages: 38
Matrox Millennium P650 User Manual preview
Millennium P650
Brand: Matrox Pages: 54
EMCIS LISN User'S Operating Manual preview
LISN
Brand: EMCIS Pages: 14
A2B Electronics ECX-200 Installation Manual preview
ECX-200
Brand: A2B Electronics Pages: 24
ZALMAN CNPS6000-Al User Manual preview
CNPS6000-Al
Brand: ZALMAN Pages: 6
SSV Embedded Systems eSOM/3517 Hardware Reference Manual preview
eSOM/3517
Brand: SSV Embedded Systems Pages: 17
YASKAWA CP 040 RS422/485 Manual preview
CP 040 RS422/485
Brand: YASKAWA Pages: 87
ZALMAN OPTIMA II CNPS10X User Manual preview
OPTIMA II CNPS10X
Brand: ZALMAN Pages: 20
ADTRAN 1200127L1 User Manual preview
1200127L1
Brand: ADTRAN Pages: 20
FabiaTech FB2701 User Manual preview
FB2701
Brand: FabiaTech Pages: 86
3Com X5 Quick Start preview
X5
Brand: 3Com Pages: 2
3Com 3CRWE825075A Quick Start Manual preview
3CRWE825075A
Brand: 3Com Pages: 8
3Com AirProtect Enterprise Engine 6100 Quick Setup Manual preview
AirProtect Enterprise Engine 6100
Brand: 3Com Pages: 12
2Wire i3812V User Manual preview
i3812V
Brand: 2Wire Pages: 20

Brands by name

Popular brands

Load more brands