Konica Minolta DRYPRO 771, Installaton Manual

Page: 65 / 100

Ch.3 Settings
< 63 >
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
• S2F REQ. BEHAVIOR : Select the action when the image size sent from the connected device is larger
than the installed film size.
Select from "DECIMATE" (proportional display) and "CROP" (length display).
Selecting "DECIMATE" prints a reduced image by fitting the image size to the
film. The reduction ratio will be printed on the output film.
Selecting "CROP" does not reduce the image, but trim the excess of the image
for the print to fit to the film. The trimmed amount in length will be printed on the
output film.
default setting : DECIMATE
• S2G FLIP : This setting determines whether display shall be highlighted.
"ON" or "OFF" may be selected.
default setting : OFF
Stamp Position and Orientation
With the reference to the density patch that is positioned up, the four positions of stamp and orientation is
described.
14x17 PORTRAIT LANDSCAPE
14x14 PORTRAIT LANDSCAPE
11x14 PORTRAIT LANDSCAPE
Ima
g
e
Ori.
UPPER
LEFT RIGHT
LOWER
UPPER
LEFT
RIGHT
LO
WER
Ima
g
e
Ori.
UPPER
LEFT RIGHT
LOWER
UPPER
LEFT
RIGHT
LO
WER
Ima
g
e
Ori.
Ima
g
e
Ori.
UPPER
LEFT RIGHT
LOWER
UPPER
LEFT
RIGHT
LO
WER
Ima
g
e
Ori.
Ima
g
e
Ori.
Density Patch