Ch.1 Before Installation
< 16 >
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
Check of Route along which Power Supply and Network Cables will be Laid
The following items should be checked with the facility supervisor.
•
The location of the hub to which the DRYPRO 771 will be connected, the route along which the
ethernet cable will be laid and necessary cable lengths.
•
The location of the power outlet (3P) to which the DRYPRO 771 will be connected, the route along
which power supply cable will be laid and necessary cable lengths.
Check also that the cables will be laid along not, for example corridors, but along routes where safety
can be ensured.
Check of Conveyance Passage
Check that the passage through which the DRYPRO 771 will be conveyed from the place of unpacking to the
place of installation satisfies the following requirements.
•
There should be no steps or sudden gradients that may expose the DRYPRO 771 to shock.
•
The dimensions of entrances and exits of any room through which the DRYPRO will pass en route to the
place of installation should be sufficient to allow ease of passage.
•
The floor along the route should be sufficient to support the DRYPRO 771 (Weight: approximately 155kg
without stand, 175kg with stand) without warping.
Maintenance Space Check
Ensure that the unit is installed in a location where the maintenance space shown at right can be ensured.
1000mm or more
600mm or more
800mm or more
600mm or more
DRYPRO
771
FRONT
Power Supply Condition Check
Check that the place of installation is furnished with power outlets that satisfy the following conditions.
UL
CE
• Voltage (Single phase)
:
120V+/-10%
220 - 240V+/-10%
• Frequency
:
60Hz
50 or 60Hz
• Maximum current consumption
:
8.5A
4.5A
• Earth
:
Type 3
Type 3
Check of Place of Unpacking
Check that there is a space of 2.5m minimum at the front of the palette (the side with the lock piece).
When unpacking, the DRYPRO 771should be lifted down from the front of the palette.
Maintenance Space
Summary of Contents for DRYPRO 771
