Konica Minolta DRYPRO 771, Installaton Manual

Page: 32 / 100

Ch.2 Unpacking and Installation
< 30 >
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
2.3 Checking the Accessories
The following parts are packed together with the DRYPRO 771. Check that all the parts listed below are
present. Should any parts be missing, the unit should be treated as an erroneous consignment.
Name of Accessories pcs Remarks Refer to
Warranty x1 Make sure to directly hand over the documents to the user.
Inspection sheet x1 Make sure to directly hand over the documents to the user.
Operation manual x1 Make sure to directly hand over the documents to the user.
Operation sheet x1 Make sure to directly hand over the documents to the user.
Attached document for doctors x1 Make sure to directly hand over the documents to the user.
Deodorant filter x1 Install the parts when the system is installed.
Deodorant filter case x1 Install the parts when the system is installed.
Suction cups x1 For film pick up at the supply unit. (spare)
Power supply cable x1 To supply the electric power
Cutter x1 To cut the edge of film package when it is loaded.
Clamp x2
Exhaust duct x1 To change the exhaust direction and/or to reduce the exhaust noise (option)
One-touch Spacers x2 To protect the network cable (option)
Accessory list x1
Protective parts(red) collection bag x1 To collect and bring back the protective parts resulted from installation.