Konica Minolta DRYPRO 771, Installaton Manual

Page: 60 / 100

Ch.3 Settings
< 58 >
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
1
Start up the service maintenance mode.
2
Select "U80 SERVICE MODE" and press the
[enter] key.
• The message "S00 DICOM SCP" will be displayed.
p.38 Starting up the
Service
Maintenance
Mode
U80 SERVICE MODE /.
S00 DICOM SCP /.
3
Press the [enter] key.
• The setting item input screen will be displayed.
.
.
.
.
4
Input the necessary characters or digits in each
of the setting windows.
• Items for setting may be selected using the
[menu/select] key.
• The example at left shows the port number input
screen ("S01 PORT NUMBER").
S01 PORT NUMBER .
PORT1=[00000]
5
Press the [enter] key after completing all input
and settings.
• After registering the settings, the screen returns to
the maintenance menu screen.
Pressing the [mode]
key will switch the input
mode between
alphabetical characters
and numerical digits.
The cursor will flash
below the position for
input. The cursor may
be shifted by using the
[select] key.
S00 DICOM SCP /.
Selecting either of following will automatically restart the DRYPRO 771.
S05 IP ADDRESS
S06 SUBNET MASK
S07 GATEWAY
S0A HOST NAME
S0B DHCP
When [exit] key is pressed in the "DICOM SCP Setting", a confirmation screen will be
displayed. Select "YES" or "NO" for the register of the changed data using [select]
key [
[ ][ \ ].
When "YES" selected : Changes to the setting (data) are registered, and the
display returns to the maintenance menu screen.
When "NO" selected : Display returns to the maintenance menu without
registering the changes to the setting (data).
Data was changed
Save the data? YES