Konica Minolta DRYPRO 771, Installaton Manual

Page: 77 / 100

Ch.3 Settings
< 75 >
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
Item Default Contents
S71 PATCH CONTROL ON Select whether to implement the density control using the density
patch.
Select from "ON" , "OFF".
"ON" : Density control is in effect.
"OFF" : Density control is not in effect.
S72 LOG WRITE MODE NORMAL Select the record level with which the logs of system operation is
recorded.
The log contains the record of initial 20 minutes from the start.
Select from "NORMAL" , "DETAILS".
Leave at "NORMAL" unless otherwise instructed.
S73 TIME ZONE 64 Select the time zone for the local where the DRYPRO 771 is
installed.
S74 LANGUAGE ENGLISH Select the language used for messages in user screen and screens
for user maintenance menu."ENGLISH" , Select from "GERMAN" ,
"FRENCH" , "SPANISH" , "ITALIAN" , "PORTUGUESE" ,
"SCANDINAVIA".
Service maintenance mode screens are always displayed in English
disregard of the language chosen here.
The current version of the DRYPRO 771 can accept English and
German.
S75 TOTAL FILM CNT - Displays the total print count since the DRYPRO 771 is installed.
Do not touch at installation.
S76 OPE. HOURS - Displays the total running time since the DRYPRO 771 is installed.
Do not touch at installation.
p.80 Time Zone
List
3.10 SYSTEM SETUP Settings
The procedure for setting the items relating to system operation of the DRYPRO 771 is described
below.
The following SYSTEM SETUP items are available.
Service Manual
web maintenance
tool > SCP >
SYSTEM SETUP