Konica Minolta DRYPRO 771, Installaton Manual

Page: 75 / 100

Ch.3 Settings
< 73 >
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
1
Start up the service maintenance mode.
2
Select "U80 SERVICE MODE" and press the
[enter] key.
• The message "S00 DICOM SCP" will be displayed.
U80 SERVICE MODE /.
S00 DICOM SCP /.
3
Press the lower [menu/select] key three times.
• The message "S30 DICOM PRIORITY" will be
displayed in the message display window.
4
Use the [menu/select] key to choose the
diagnostic device for which settings are to be
made.
• The channel will be switched.
5
Press the [enter] key.
• The setting item input screen will be displayed.
6
Input the necessary characters or digits in each
of the setting windows.
• Items for setting may be selected using the
[menu/select] key.
• The example at left shows the default LUT
selection enable/disable input screen ("S31
DEFAULT LUT ").
7
Press the [enter] key after completing all input
and settings.
• After registering the settings, the screen returns to
the maintenance menu screen.
.
.
.
.
S31 DEFAULT LUT .
DICOM
S10 DICOM SCU /.
CH 1 CS-1
S30 DICOM PRIORITY/.
CH 1 CS-1
p.38 Starting up the
Service
Maintenance
Mode
When [exit] key is pressed in the "PRINT CONDITION Setting" of the service
maintenance mode, a confirmation screen will be displayed. Select "YES" or "NO" for
the register of the changed data using [select] key [
[ ][ \ ].
When "YES" selected : Changes to the setting (data) are registered, and the
display returns to the maintenance menu screen.
When "NO" selected : Display returns to the maintenance menu without
registering the changes to the setting (data).
Data was changed
Save the data? YES
.
.
.
.